What are the issues to pay attention to when transporting and loading/unloading steel lined PTFE storage tanks

Due to the large volume of steel lined PTFE storage tanks, it is difficult to handle them. Therefore, measures should be taken during transportation and loading and unloading to avoid damage and other issues. The following issues should be noted during transportation and loading and unloading:

1. When the equipment reaches its destination, it can be easily unloaded by gently placing them on the ground and then using a crane or forklift to load and unload these buckets. It should be noted that the length of the forklift arm must be greater than the diameter of the container.

2. Do not roughly push the tanker off the truck, drag it back and forth flat on the ground, and do not hang the rope on the flange or other accessories of the tanker to avoid loosening or falling.

3. When transporting steel lined PTFE storage tanks directly, the entire platform should be inspected. The entire platform surface must be supported as a whole and should not be suspended. It is necessary to confirm in advance whether there are stones or sharp objects on the platform. If there are sharp objects, they must be cleaned up in advance.

4. During transportation, nut loosening may occur due to vibration. Before assembling the piping, it is important to confirm if this is the case and adjust it promptly.

In transportation vehicles, some preparation and stabilization work should also be done in advance to ensure that the steel lined PTFE storage tank will not be damaged during transportation. In addition, users should also perform corresponding inspection work when receiving the device to ensure that there is no damage during transportation.